Mipro ACT 312-H(6A) Datasheet download pdf (Page 15)

RF Interference

Feedback

Symptom Solutions

! Press AutoScan button to locate a clear, interference-free

channel.

! Use preset compatible channels in the same group when

operating multiple systems.

! Place receivers away or remove the sources of RF interference

like solid metal objects, electronic equipment & digital devices,

dimmers, effect equipment, motors.

! Avoid operating a frequency on a local TV channel.

! A higher squelch setting improves protection against

interference. (however, resulting in limited range)

! Turn off one transmitter, if both transmitters are operating on

the same frequency.

! Fresh batteries in transmitter.

! Turn down the sound system volume.

! Move microphone closer to the performer's mouth.

! Reduce transmitter gain if set too high.

! Position microphone further away from the speakers. Do not

point towards speakers.

! Use right type of microphone for the specific applications.

Uni/Omni, Supercardioid / Cardioid.

! Power off all unused microphones.

Troubleshooting

Symptom Solutions

No Sound

! Power-on receiver & transmitter.

! Receiver is plugged into a power outlet and cable connected

to mixer/amplifier.

! Fresh batteries in transmitter and inserted with correct

polarity.

! Match receiver & transmitter frequency.

! Close proximity between the transmitter and receiver antenna.

! Line-of-sight path between the transmitter and receiver

antenna.

! Reposition the receiver and/or receiver antennas.

! Receiver antennas are connected.

! Elevate receiver antennas as high as possible.

! Keep hands off of the transmitter antenna.

! Close proximity between the transmitter and receiver antenna.

! Adjust antenna orientation.

! Reposition the receiver and/or receiver antennas.

! Receiver antennas are connected.

! Undamaged antennas.

! Fresh batteries in transmitter.

! Adjust for proper squelch level setting.

! Match receiver & transmitter frequency.

! Adjust for proper squelch level setting.

! Reduce transmitter gain, if set too high.

! Recommendation: set to 0dB (Mic Level).

! Reduce receiver output setting.

! Proper setting on mixer input gain or integrated amplifier mic

level control.

! Fresh batteries in transmitter.

Signal Drop-outs

Limited Range

No RF Signal

Distortion

Diversity Wireless Systems Diversity Wireless Systems

1 2 ... 10 11 12 13 14 15

Comments to this Manuals

No comments

Mipro ACT 312-H(6A) Datasheet Page 15

Comments to this Manuals

Related products and manuals for Radio receivers Mipro ACT 312-H(6A)